NITRILE GLOVES
- Protein concentration: 50ug / dm2 or less
- Protection from unwanted and dangerous substances
- Beaded cuff ensures easy donning and prevent roll down
- Superior strength with better puncture resistance
- Full textured or Finger Tip textured enhances wet and dry grip
- Thinner gauge improves tactile sensitivity
- Custom design enhances comfort and fit
- Provide an alternative solution for individuals who are allergic to natural rubber latex
| Material | Synthetic Nitrile latex. |
| Type | Non-Sterile Powder-Free. Ambidextrous; Finger Tip Textured; Beaded Cuff; White or Coloured (Blue, Light Blue, …) |
| Quality Standards | Conforms to ASTM D6319 Manufactured under ISO9001: 2008, ISO 13485:2003. ISO 22000:2005 Quality Management System. Manufactured from 100% nitrile (Acrylonitrile-Butadiene) |
| Gloves Size | Extra-small, Small, Medium, Large, Extra-large. Marked in the check box on the shipping carton with black ink. |
| Storage | Store in a dry and cool place, the temperature not higher than 38°C. |
| Shelf-fife | 3 years from the date of manufacturing. |
| DIMENSIONS | Standards | |
| DN99 | ASTM D6319 | |
| Length (mm) | 230 min | 220 min (XS, S) 230 min (M, L, XL) |
| Width (mm) | 75 ± 5 (XS) 85 ± 5 (S) 95 ± 5 (M) 105 ± 5 (L) 115 ± 5 (XL) | 70 ± 10 (XS) 80 ± 10 (S) 95 ± 10 (M) 110 ± 10 (L) 120 ± 10 (XL) |
| Thickness- Single wall (mm) | Fingers : 0. 08 mm min Palm : 0.06 mm min | Fingers : 0.050 mm min Palm : 0.05 mm min |
| Tensile | Tensile strength (MPA) Before aging: 18Mpa min After aging: 20Mpa min
Elongation at break (%) | Tensile strength (MPA) Before aging: 14Mpa min After aging: 14Mpa min
Elongation at break (%) |
| Powder Content | 2 mg/glove maximum | |
| Protein Content | Free Protein | |
Product Specification- Material
Synthetic Nitrile Latex
- Type
Powdered, Non-Sterile
- Colour
Blue & White
- Flavour (If applicable)
N/A
- Design & Features
Finger Textured or Palm Textured Surface, Ambidextrous, Beaded Cuff, USP Grade Absorbable Cornstarch
- Storage
The gloves shall maintain their properties when stored in a dry condition. Avoid direct sunlight.
- Shelf Life
5 years from the date of manufacturing
- Application
Medical, Healthcare, Dental
Quality PerformanceFunctional Benefits- A good barrier protection against bacteria, viruses, chemicals and dangerous substances
- An alternative solution for individuals who are allergic to Natural Rubber Latex
- Free from latex protein, eliminating Type I Immediate Hypersensitivity reaction
- Custom design enhanced comfort and fit
- Finger or palm textured enhanced wet and dry grip with added handling precision
- Lightly powdered interior promote easy donning and doffing
Glove Sizes- XS
- S
- M
- L
- XL
- XXL
Quality Standards- Conform to ASTM D6319, EN455, ISO 11193 Standards
- Manufactured under QSR (GMP), ISO 9001:2015 and ISO 13485:2016 Quality Management System
Physical Dimension & Physical PropertiesDN GLOVESize Length (mm) Palm width (mm)
- XS
- S
- M
- L
- XL
- XXL
- Min 230
- Min 240
- 300 ± 10
- 76 ± 3
- 84 ± 3
- 94 ± 3
- 105 ± 3
- 113 ± 3
- 123 ±3
ASTM D6319Size Length (mm) Palm width (mm) Thickness : Single wall (mm) - XS
- S
- M
- L
- XL
- XXL
- Min 220 (XS, S)
- Min 230 (M, L, XL, XXL)
- 70 ± 10
- 80 ± 10
- 95 ± 10
- 110 ± 10
- 120 ± 10
- 130 ± 10
- Finger: Min 0.05 (≥ 2.0 Mil)
- Palm : Min 0.05 (≥ 2.0 Mil)
Elongation at Break, %
- Before Aging Min 500
- After Aging Min 400
Tensile Strength, MPa- Before Aging Min 14
- After Aging Min 14
EN 455Size Length (mm) Palm width (mm) Thickness : Single wall (mm) - XS
- S
- M
- L
- XL
- Min 240
- ≤80
- 80 ± 10
- 95 ± 10
- 110 ± 10
- ≥110
- N/A
Median Force at Break, N - Before Aging Min 6
- After Aging Min 6
ISO 11193Size Length (mm) Palm width (mm) Thickness : Single wall (mm) - XS
- S
- M
- L
- XL
- Min 220 (XS, S)
- Min 230 (M, L, XL)
- ≤80
- 80 ± 10
- 95 ± 10
- 110 ± 10
- ≥110
- Smooth : Min 0.08 (≥ 3.2 Mil)
- Textured : Min 0.11 (≥ 4.4 Mil)
Elongation at Break, %- Before Aging Min 500
- After Aging Min 400
Median Force at Break, N- Before Aging Min 7
- After Aging Min 6
Product Safety ConformanceCHEMICAL RESIDUE TESTED PassPurpose: To ensure the gloves are free from any chemical substances and safe to use.
Chemical Test (s) Test Results (μg/g) Butylated Hydroxyanisole (BHA) Not Detected Butylated Hydroxytoluene (BHT) Not Detected Diphenyl Guanidine (DPG) Not Detected Diphenyl Thiourea (DPT) Not Detected Mercaptobenzothiazole (MBT) Not Detected Tetramethylthiuram Disulphide (TMTD) Not Detected Zinc Dibutyldithiocarbamate (ZDBC) Not Detected Zinc Diethyldithiocarbamate (ZDEC) Not Detected Zinc Dimethyldithiocarbamate (ZDMC) Not Detected Zinc Mercaptobenzimidazole (ZMBI) Not Detected Zinc Mercaptobenzothiazole (ZMBT) Not Detected Zinc Pentamethyleneditithiocarbamate (ZPMC) Not Detected
Remark: Applicable to selected product. Please liaise with our representative for further details.
VIRAL PENETRATION TESTED PassReference: ASTM F1671 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood - Borne Pathogens Using Phl-X 174 Bacteriophage Penetration as a Test System
Purpose: To test the barrier protection of the gloves from the passages of the viruses.
Viral Penetration Test Results PASSES
Remark: Applicable to selected products. Please liaise with our representative for further details.
BIOCOMPATIBILITY TESTED PassReference: ISO 10993-10 (Test for Skin Irritation and Skin Sensitization)
Purpose: Biological evaluation for medical devices for irritation and delayed type hypersensitivity.
Biocompatibility Test Test Results Primary Skin Irritation PASSES
Not a primary skin irritant under condition of the study
Skin Sensitization PASSES
Not a contact sensitizer under condition of the study
Remark: Applicable to selected product. Please liaise with our representative for further details.
HEAVY METAL TESTED PassReference: EPA Method 3052
Purpose: To ensure the gloves are free from heavy metal substances and safe to use.
Chemical Test (s) Test Results (μg/g) Cadmium (Cd) Not Detected Lead (Pb) Not Detected Mercury (Hg) Not Detected Arsenic (As) Not Detected Antimony (Sb) Not Detected Tin (Sm) Not Detected
Remark: Applicable to selected product. Please liaise with our representative for further details.
PHTHALATES TESTED PassPurpose: Compliance on REACH Regulation (EC) 1907/2006 Annex XVII requirements for phthalates
Chemical Test (s) Test Results (μg/g) Dibutyl Phthalate (DBP) Not Detected Di(2-ethylhexyl) Phthalate (DEHP) Not Detected Di-n-octyl Phthalate (DNOP) Not Detected Di-isononyl Phthalate (DINP) Not Detected Di-isodecyl Phthalate (DIDP) Not Detected Benzyl butyl Phthalate (BBP) Not Detected
Remark: Applicable to selected product. Please liaise with our representative for further details.
- Material
Synthetic Nitrile Latex
- Type
Powdered, Non-Sterile
- Colour
Blue & White
- Flavour (If applicable)
N/A
- Design & Features
Finger Textured or Palm Textured Surface, Ambidextrous, Beaded Cuff, USP Grade Absorbable Cornstarch
- Storage
The gloves shall maintain their properties when stored in a dry condition. Avoid direct sunlight.
- Shelf Life
5 years from the date of manufacturing
- Application
Medical, Healthcare, Dental
- A good barrier protection against bacteria, viruses, chemicals and dangerous substances
- An alternative solution for individuals who are allergic to Natural Rubber Latex
- Free from latex protein, eliminating Type I Immediate Hypersensitivity reaction
- Custom design enhanced comfort and fit
- Finger or palm textured enhanced wet and dry grip with added handling precision
- Lightly powdered interior promote easy donning and doffing
- XS
- S
- M
- L
- XL
- XXL
- Conform to ASTM D6319, EN455, ISO 11193 Standards
- Manufactured under QSR (GMP), ISO 9001:2015 and ISO 13485:2016 Quality Management System
| Size | Length (mm) | Palm width (mm) | |
|---|---|---|---|
|
|
|
| Size | Length (mm) | Palm width (mm) | Thickness : Single wall (mm) |
|---|---|---|---|
|
|
|
|
Elongation at Break, %
- Before Aging Min 500
- After Aging Min 400
- Before Aging Min 14
- After Aging Min 14
| Size | Length (mm) | Palm width (mm) | Thickness : Single wall (mm) |
|---|---|---|---|
|
|
|
|
- Before Aging Min 6
- After Aging Min 6
| Size | Length (mm) | Palm width (mm) | Thickness : Single wall (mm) |
|---|---|---|---|
|
|
|
|
- Before Aging Min 500
- After Aging Min 400
- Before Aging Min 7
- After Aging Min 6
Purpose: To ensure the gloves are free from any chemical substances and safe to use.
| Chemical Test (s) | Test Results (μg/g) |
|---|---|
| Butylated Hydroxyanisole (BHA) | Not Detected |
| Butylated Hydroxytoluene (BHT) | Not Detected |
| Diphenyl Guanidine (DPG) | Not Detected |
| Diphenyl Thiourea (DPT) | Not Detected |
| Mercaptobenzothiazole (MBT) | Not Detected |
| Tetramethylthiuram Disulphide (TMTD) | Not Detected |
| Zinc Dibutyldithiocarbamate (ZDBC) | Not Detected |
| Zinc Diethyldithiocarbamate (ZDEC) | Not Detected |
| Zinc Dimethyldithiocarbamate (ZDMC) | Not Detected |
| Zinc Mercaptobenzimidazole (ZMBI) | Not Detected |
| Zinc Mercaptobenzothiazole (ZMBT) | Not Detected |
| Zinc Pentamethyleneditithiocarbamate (ZPMC) | Not Detected |
Remark: Applicable to selected product. Please liaise with our representative for further details.
Reference: ASTM F1671 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood - Borne Pathogens Using Phl-X 174 Bacteriophage Penetration as a Test System
Purpose: To test the barrier protection of the gloves from the passages of the viruses.
| Viral Penetration | Test Results |
|---|---|
| PASSES |
Remark: Applicable to selected products. Please liaise with our representative for further details.
Reference: ISO 10993-10 (Test for Skin Irritation and Skin Sensitization)
Purpose: Biological evaluation for medical devices for irritation and delayed type hypersensitivity.
| Biocompatibility Test | Test Results |
|---|---|
| Primary Skin Irritation | PASSES Not a primary skin irritant under condition of the study |
| Skin Sensitization | PASSES Not a contact sensitizer under condition of the study |
Remark: Applicable to selected product. Please liaise with our representative for further details.
Reference: EPA Method 3052
Purpose: To ensure the gloves are free from heavy metal substances and safe to use.
| Chemical Test (s) | Test Results (μg/g) |
|---|---|
| Cadmium (Cd) | Not Detected |
| Lead (Pb) | Not Detected |
| Mercury (Hg) | Not Detected |
| Arsenic (As) | Not Detected |
| Antimony (Sb) | Not Detected |
| Tin (Sm) | Not Detected |
Remark: Applicable to selected product. Please liaise with our representative for further details.
Purpose: Compliance on REACH Regulation (EC) 1907/2006 Annex XVII requirements for phthalates
| Chemical Test (s) | Test Results (μg/g) |
|---|---|
| Dibutyl Phthalate (DBP) | Not Detected |
| Di(2-ethylhexyl) Phthalate (DEHP) | Not Detected |
| Di-n-octyl Phthalate (DNOP) | Not Detected |
| Di-isononyl Phthalate (DINP) | Not Detected |
| Di-isodecyl Phthalate (DIDP) | Not Detected |
| Benzyl butyl Phthalate (BBP) | Not Detected |
Remark: Applicable to selected product. Please liaise with our representative for further details.